Cross stitch floss calculator

Type each colour and its stitch count, and this cross stitch floss calculator estimates the floss and skeins you need. It adjusts for your fabric count and strands, and shows how it gets the number.

Fabric and units
Units
Colours

One row per colour, with the number of full stitches in that colour. Your chart's key or pattern software lists them.

%

For mistakes and tails.

Skeins to buy

8 skeins

5 colours, 9,730 stitches. One skein covers about 1,900 full stitches on 14 count Aida with 2 strands, including 20% extra.

Floss estimate, 14 count Aida, 2 strands
SymbolColourStitchesFlossSkeins
DMC 3102,40011 yd2
DMC 3211,3506.2 yd1
DMC 38655,20023.9 yd3
DMC 4136002.8 yd1
DMC 7261800.8 yd1
Total9,73044.7 yd8

This is an estimate. It counts full cross stitches only, so add backstitch, French knots and fractional stitches yourself. It assumes 8 m (8.7 yd) skeins like DMC and Anchor, 18 in (45 cm) lengths with 3 in (7.5 cm) lost to starting and finishing each one, and two diagonals on the front plus two straight runs on the back for every stitch. Scattered "confetti" stitches use more. Buy every skein of a colour at the same time so the dye lot matches.

How the floss estimate works

Every full cross stitch uses a set length of thread: two diagonals on the front and two straight runs on the back. That's about 4.8 times the width of one stitch, so it depends on the fabric count. The calculator adds what you lose to starting and finishing each length, then your extra percentage.

  1. Thread per stitch = 4.83 × stitch width. On 14 count a stitch is 1.81 mm wide, so 8.8 mm.
  2. Add tails: you lose about 3 in of every 18 in length, so multiply by 1.2. That's 10.5 mm per stitch.
  3. Add your extra, 20% by default, for mistakes and confetti. That's 12.6 mm per stitch.
  4. A skein has 8 m of 6 strands. With 2 strands that's 3 lengths of 8 m, or 24 m to stitch with.
  5. 24 m ÷ 12.6 mm = about 1,900 stitches per skein.

Stitches per skein by fabric and strands

Divide a colour's stitch count by the number here and round up.

Full stitches per 8 m skein, with 20% extra
Fabric1 strand2 strands3 strands
11 count Aida2,9801,490990
14 count Aida3,8001,9001,260
16 count Aida4,3402,1701,440
18 count Aida4,8902,4401,630
22 count Aida5,9702,9801,990
28 evenweave over 23,8001,9001,260
32 linen over 24,3402,1701,440

Worked example

A five colour chart on 14 count Aida with 2 strands. The calculator above opens with these rows.

Floss for a five colour chart
ColourStitchesFlossSkeins
DMC 3102,40010.1 m2
DMC 3211,3505.7 m1
DMC 38655,20021.9 m3
DMC 4136002.5 m1
DMC 7261800.8 m1

DMC 3865 covers the background with 5,200 stitches and needs 3 skeins. Buy all of a colour at once. Skeins from a later dye lot can look slightly different once stitched.

What the estimate leaves out

It counts full cross stitches only. Backstitch uses about 1 in of thread per stitch with 1 strand, so a long outline in one colour can need a skein of its own. French knots, beads and fractional stitches aren't counted. Scattered single stitches use more than solid blocks, so raise the extra to 30% for confetti-heavy charts.

Questions

How much cross stitch floss do I need?

On 14 count Aida with 2 strands, a skein covers about 1,900 full stitches with 20% extra. Divide each colour's stitch count by that and round up to whole skeins.

How do I calculate how much thread I need for cross stitch?

Multiply the stitches in a colour by the thread per stitch for your fabric (about 1.26 cm on 14 count, with waste), multiply by strands ÷ 6, and divide by the 8 m skein length.

How many strands of floss for 11 count cross stitch?

3 strands for full coverage, or 2 for a lighter look.

How many strands of floss for 18 count cross stitch?

2 strands for cross stitch and 1 for backstitch.

How many yards are in a DMC skein?

8.7 yards, or 8 m, of six-strand floss. Anchor skeins are the same length.