Cross stitch calculator

Enter your chart's size in stitches and pick your fabric. The cross stitch calculator gives the fabric to cut in inches and cm, checks your chart fits a hoop or a piece you own, and estimates floss per colour.

Fabric and units
Units
Your chart
stitches
stitches
Margin
in

Plain fabric around the design, for framing or finishing.

Fabric to cut

13.5 × 16 in

Or 34 × 41 cm. That's the 7.1 × 10 in design plus 3 in on every side, rounded up.

13.5 in16 in3.2 in
100 × 140 stitches on 14 count Aida: a 7.1 × 10 in design on 13.5 × 16 in of fabric, drawn to scale. Design Fabric Margin
Pre-cut piece
A fat eighthAbout 13.5 × 18 in
Design size
7.1 × 10 in18.1 × 25.4 cm
Smallest display hoop
14 in (36 cm)The corners need 12.3 in across
Floss and needle
2 strandsSize 24 tapestry needle, backstitch 1 strand
Stitches per inch
145.5 per cm

How to use the cross stitch calculator

  1. Pick your fabric. For linen or evenweave, the list already counts the stitch as going over 2 threads. Choose Another count for anything else, or to stitch over 1.
  2. Type the chart's width and height in stitches. Patterns print it near the title, like 100w × 140h.
  3. Set the margin. Tap a preset for a frame, hoop or card, or type your own in inches or cm.
  4. Read the fabric to cut. Switch to What fits to check a piece you already have or a display hoop, and to Floss for skeins per colour.
  5. Copy the share link to save your numbers or send them to a friend or your framer.

The fabric maths, step by step

Every cross stitch fabric calculator uses the same two steps. First, stitches divided by stitches per inch gives the design size. Second, add the margin on both sides.

Example: a chart 100 stitches wide and 140 high on 14 count Aida.

  1. Width: 100 ÷ 14 = 7.1 in (18.1 cm).
  2. Height: 140 ÷ 14 = 10 in (25.4 cm).
  3. Add 3 in on every side: 7.1 + 6 = 13.1 in, and 10 + 6 = 16 in.
  4. Cut 13.5 × 16 in (34 × 41 cm).

Move the same chart to 18 count Aida and the stitches shrink. The design is 5.6 × 7.8 in (14.1 × 19.8 cm) and you cut 12 × 14 in. Stitch it on 28 count evenweave over 2 and you are back to the 14 count numbers.

For cm, multiply inches by 2.54, or divide stitches by the stitches per cm. 14 count is 5.51 stitches per cm. Some European fabric is labelled per 10 cm: 54 per 10 cm is 14 count, and 70 per 10 cm is 18 count.

How much margin to leave

The margin is plain fabric on every side of the design. You need it to hold the fabric in a hoop while you stitch, and to frame or finish the piece after.

Margin on each side
FinishInchescm
Card or ornament1 in2.5 cm
Hoop display2 in5 cm
Frame3 in7.5 cm
Large frame or scroll frame4 in10 cm

When in doubt, go bigger. You can trim fabric, but you can't add it back. Framers usually ask for at least 3 in. See how much fabric for cross stitch for each finish in detail.

Cross stitch size chart

Finished width in inches for common chart sizes. Use the height the same way.

Design width in inches
Stitches11 ct14 ct16 ct18 ct28 over 232 over 2
504.53.63.12.83.63.1
1009.17.16.35.67.16.3
15013.610.79.48.310.79.4
20018.214.312.511.114.312.5
25022.717.915.613.917.915.6
30027.321.418.816.721.418.8

Full size chart in inches and cm, from 10 to 500 stitches.

Calculators for each fabric count

Each page opens the calculator set to that fabric, with its own size table, floss and needle advice.

More cross stitch calculators

Floss, needles and what fits

The Floss tab turns each colour's stitch count into metres and skeins. It counts full stitches only and states its assumptions under the table, so you can see where the number comes from. It's an estimate, so buy a spare of colours that cover large areas.

What fits works the other way round. Enter a piece of fabric you already own, or the opening of a frame, and it shows the largest chart that fits with your margin. Pick Display hoop to see the biggest design for each hoop size. A rectangle has to fit across its diagonal, so the corners don't disappear under the hoop.

Questions

How do I calculate the fabric size for cross stitch?

Divide the chart's width and height in stitches by your fabric's stitches per inch. That's the design size. Then add your margin twice to each side, once for each edge. A 100 × 140 chart on 14 count Aida is 7.1 × 10 in, so with 3 in on every side you cut 13.5 × 16 in.

How much fabric should I leave around a cross stitch?

Leave 3 in (7.5 cm) on every side for a framed piece. That gives the framer room to lace or stretch it. Use 2 in (5 cm) for a hoop, 1 in (2.5 cm) for cards and ornaments, and 4 in (10 cm) for big pieces or a scroll frame.

Is 28 count linen the same as 14 count Aida?

Yes, for size. Linen and evenweave are usually stitched over 2 threads, so 28 count gives 14 stitches per inch, the same as 14 count Aida. A chart comes out the same size on both. Stitched over 1 thread, 28 count is half the size.

How long is 100 stitches on 14 count Aida?

100 ÷ 14 = 7.14 in, or about 18.1 cm. On 18 count the same 100 stitches are 5.56 in.

How much floss do I need for cross stitch?

On 14 count Aida with 2 strands, one 8 m skein covers about 1,900 full stitches, with 20% extra for waste. Divide each colour's stitch count by that and round up. The floss calculator does it per colour.

What does count mean in cross stitch fabric?

The count is how many squares (Aida) or threads (evenweave and linen) there are in one inch. 14 count Aida has 14 squares per inch, so you make 14 stitches per inch. A higher count means smaller stitches and a smaller finished piece.