Cross stitch hoop size calculator

Pick a hoop and fabric, and this cross stitch hoop size calculator shows the biggest design that fits inside it, corners included. Enter your chart to check it fits, and see how much fabric to cut for finishing.

Fabric and units
Units
Your chart
stitches
stitches
Design shape
Fit it to

10 in hoop

Fits

Your 70 × 90 design (5 × 6.4 in) fits a 10 in (25 cm) hoop with at least ½ in of fabric showing at the corners.

10 in hoop
Your 70 × 90 design in a 10 in hoop, drawn to scale. Design Fabric Hoop
Smallest hoop for your design
10 in (25 cm)The corners need 8.1 in across
Biggest at your shape in a 10 in hoop
77 × 99 stitches5.5 × 7.1 in
Biggest square
89 × 89 stitchesIn a 10 in hoop
Fabric to cut for this hoop
14 × 14 in2 in past the hoop on each side, to lace or glue the back

Hoop size chart

The biggest square chart that shows fully in each display hoop, with ½ in (1.3 cm) of fabric clear at the corners. The last column is the fabric to cut so you can lace or glue the back.

Biggest square chart in each hoop, ½ in clear at the corners
Hoop14 count16 count18 countFabric to cut
4 in (10 cm)29 × 2933 × 3338 × 388 in
5 in (13 cm)39 × 3945 × 4550 × 509 in
6 in (15 cm)49 × 4956 × 5663 × 6310 in
7 in (18 cm)59 × 5967 × 6776 × 7611 in
8 in (20 cm)69 × 6979 × 7989 × 8912 in
9 in (23 cm)79 × 7990 × 90101 × 10113 in
10 in (25 cm)89 × 89101 × 101114 × 11414 in
12 in (30 cm)108 × 108124 × 124140 × 14016 in
14 in (36 cm)128 × 128147 × 147165 × 16518 in

Why the corners matter

Most hoop advice says pick one 1 to 2 in bigger than the design. That works for round designs. A rectangle has to fit across its diagonal, which is longer than either side. A 4 × 5 in design has a 6.4 in diagonal, so it needs a 7 or 8 in hoop, not a 6.

Set Design shape to Round for circular designs. Then only the longest side has to fit.

Example: a 70 × 90 chart on 14 count Aida.

  1. Size: 70 ÷ 14 = 5 in wide, 90 ÷ 14 = 6.4 in high.
  2. Diagonal: √(5² + 6.4²) = 8.1 in.
  3. Add ½ in each side: 9.1 in. The smallest hoop is 10 in.
  4. Cut 14 × 14 in of fabric: the hoop plus 2 in all round.

Working hoop or display hoop

A working hoop holds the fabric tight while you stitch. It can be any size, and you move it around the design. 5 to 8 in is comfortable for most hands. A display hoop frames the finished piece, so the whole design has to fit inside it. This page is about display hoops.

Common hoop sizes are 3, 4, 5, 6, 7, 8, 9, 10, 12 and 14 in. In cm they're sold as 8, 10, 13, 15, 18, 20, 23, 25, 30 and 36.

Questions

How big should a cross stitch hoop be?

For display, big enough that the design's diagonal plus about 1 in fits inside. For stitching, any size from 5 to 8 in that's comfortable to hold.

How do I calculate the right hoop size?

Work out the design size in inches (stitches ÷ count). Find the diagonal: the square root of width² plus height². Add 1 in and pick the next hoop up.

What are the different sizes of cross stitch hoops?

3, 4, 5, 6, 7, 8, 9, 10, 12 and 14 in are the common sizes, about 8 to 36 cm.

How much fabric do I need for a hoop?

The hoop's size plus 2 in (5 cm) on every side, so you can pull it tight and lace or glue the back. A 6 in hoop needs a 10 in square.