How much fabric for cross stitch

To work out how much fabric you need for cross stitch, divide the chart's stitches by your fabric count, then add a margin on every side. The calculator below does both. Tap a finish to set the margin.

Fabric and units
Units
Your chart
stitches
stitches
Margin
in

Plain fabric around the design, for framing or finishing.

Fabric to cut

13.5 × 16 in

Or 34 × 41 cm. That's the 7.1 × 10 in design plus 3 in on every side, rounded up.

13.5 in16 in3.2 in
100 × 140 stitches on 14 count Aida: a 7.1 × 10 in design on 13.5 × 16 in of fabric, drawn to scale. Design Fabric Margin
Pre-cut piece
A fat eighthAbout 13.5 × 18 in
Design size
7.1 × 10 in18.1 × 25.4 cm
Smallest display hoop
14 in (36 cm)The corners need 12.3 in across
Floss and needle
2 strandsSize 24 tapestry needle, backstitch 1 strand
Stitches per inch
145.5 per cm

How much fabric for each finish

How much plain fabric to leave around the design depends on what you'll do with it. Here's a 100 × 100 chart on 14 count Aida (7.1 in square) with each margin:

Fabric to cut for a 100 × 100 chart on 14 count
FinishMargin each sideFabric to cut
Card or ornament1 in (2.5 cm)9.5 × 9.5 in
Hoop display2 in (5 cm)11.5 × 11.5 in
Frame3 in (7.5 cm)13.5 × 13.5 in
Large frame or scroll frame4 in (10 cm)15.5 × 15.5 in

Step by step

  1. Find the chart size in stitches on the pattern, like 100w × 140h.
  2. Find your fabric's stitches per inch. Aida: the count. Linen or evenweave over 2: half the count.
  3. Divide width and height by stitches per inch. That's the design size.
  4. Add the margin twice to each. 3 in on every side adds 6 in to the width and 6 in to the height.
  5. Round up to an easy measurement and cut along a thread.

Example: a chart 100 stitches wide and 140 high on 14 count Aida.

  1. Width: 100 ÷ 14 = 7.1 in (18.1 cm).
  2. Height: 140 ÷ 14 = 10 in (25.4 cm).
  3. Add 3 in on every side: 7.1 + 6 = 13.1 in, and 10 + 6 = 16 in.
  4. Cut 13.5 × 16 in (34 × 41 cm).

Tips before you cut

Cut along a single row of holes so the edge is straight. Measure twice. Zigzag, overlock or tape the edges so they don't fray while you stitch. Find the centre by folding in half both ways, and start stitching from the middle of the chart.

Allow extra for shrinkage if you plan to wash the fabric first. Cotton Aida can shrink a little. A few millimetres per side is enough.

Fabric for a standard frame

If you already have the frame, work from its size instead of the chart. Cut the frame's size plus 2 in (5 cm) on every side, so there's fabric to wrap around the backing board. Then check the chart fits the opening with the What fits tab.

Fabric to cut for common frames
FrameFabric to cutIn cm
5 × 7 in9 × 11 in23 × 28 cm
8 × 10 in12 × 14 in31 × 36 cm
11 × 14 in15 × 18 in39 × 46 cm
12 × 16 in16 × 20 in41 × 51 cm
16 × 20 in20 × 24 in51 × 61 cm

Questions

How do I calculate the fabric size needed for cross stitch?

Divide the chart's width and height in stitches by the stitches per inch. Then add the margin twice to each measurement.

How much fabric should I leave around a cross stitch?

3 in (7.5 cm) on every side for framing, 2 in (5 cm) for a hoop, 1 in (2.5 cm) for cards and ornaments, 4 in (10 cm) for big pieces.

How many stitches are in 18 count Aida?

18 per inch across and down, so 324 in each square inch.

How many strands for 20 count Aida?

1 or 2 strands. 2 gives full coverage but feels thick in the small holes, so many stitchers use 1.